Magical Etiquette 101

April 22, 2013 in Sage & Scourge

I recently had an experience with a guest at my coven’s ritual, which is held in my home. This guest came in and, without asking, touched our altar and picked up tools. He also made negative comments about the way we do ritual. Needless to say, the evening only went down hill from there and the guest was not invited back.

This brings up magical etiquette, both in your own home and in the homes of others. There are a few basics that most people should be aware of. When you go to another practitioner’s house, never touch anything without permission. Everyone approaches their tools differently, and while it might be fine with permission, you should never just pick things up. This is extremely disrespectful. The same goes for altars and shrines. This isn’t just out of respect for the person who owns the altar or shrine, but for your own protection as well. Do you know what sort of work this person is doing? Do you want to inadvertantly become a part of anything they do in the privacy of their own home? Say they’re doing a love spell for a friend; what might be the results if you end up putting your energy into whatever work is being done?

This also goes for things that you might not take to be magical or religious in nature. You never know what that statue might mean to the person who lives there.

Not all of us, but most, intertwine our magical rituals with our religious ones. These are extremely personal workings that you just don’t get to butt into without permission. And this brings us to our next point; don’t make negative comments about the things you see. Our guest kept telling us that what we were doing was not what another group in the area did, and that therefore we were obviously doing things incorrectly. Why wouldn’t we use lines in our ritual that the other group used? You can see where this was quite offensive. When you go to someone else’s ritual, understand that they may not be working the way that you are used to. What they do is not wrong, it is simply different, and expecting them to change what they do to make you more comfortable is not appropriate. If you have that much of a problem with different rituals, you shouldn’t be the guest of another group in the first place. It is perfectly OK to turn down an invitation to a group’s ritual.

You might see something and disagree with how it was done, or think it should have been done differently. However, you are a guest. Ask about what you’ve seen in a positive manner. “That was a very interesting casting. May I ask why you do it that way?” is much more friendly than “I don’t do MY casting that way!” It’s offensive to force yourself into someone else’s workings and imply that you could have done it better.

When our coven has a first time guest in ritual, we explain what we will be doing, and we make sure to ask if the guest has questions at various intervals (it is actually part of the way we operate to assign certain coven members the task of making sure guests are informed and made to feel welcome). Most groups will do this if you are invited as a guest to ritual. You as the guest should expect a certain level of explanation about the ritual itself. This doesn’t mean that you’re going to learn all the secrets a group has, or be “trained,” but you deserve a basic explanation of the etiquette for the things that will be coming up in ritual. One of the worst rituals I’ve ever attended was so because there was no explanation of what was planned, and I didn’t know how to react to the things that were happening or what words to say at certain points.

If you are holding a public ritual, you also need to remember to do this. Do not assume your guests’ level of knowledge, experience, or tolerance level. A friend of mine told me about a ritual she went to that was for women’s spirituality. Sounds pretty standard right? It wasn’t until the priestess smeared something on her forehead in the middle of ritual that my friend found out that it was someone’s menstrual blood. Needless to say, smearing a stranger’s menstrual blood on someone else without explaining this sort of thing or asking permission is invasive in more ways than one. Think about what you are doing and ask people if they are OK with what is being planned, especially in cases where bodily fluids are being used.

It should also be pretty obvious that you shouldn’t insert any of your own energy into something without discussing it first with your host. Maybe your help will be welcomed and appreciated, but you can’t know without asking. Again, you don’t know exactly what a person is working toward and it’s arrogant and disruptive to assume.

Walking into another practitioner’s home should be like walking into anyone else’s home, the same basic etiquette applies. But unlike everyone else, where poking through someone’s medicine cabinet is probably not going to get you into trouble, poking your nose without permission into a practitioner’s workings might get you into a whole lot of trouble in ways that you won’t even see until six months down the road.

Don’t assume; always ask, and be aware that most things you see are probably not mundane. Look, don’t touch, and remember, you break it, you’re probably going to buy it, in a very metaphysical and unpleasant way.

The Care of Magical Tools-Blessing and Consecrating

January 20, 2013 in Hearth and Home, Hearth Witchery

In the previous installment I discussed the physical and energetic methods of cleansing magical tools, the next step is to bless and amp them up. Empowering is simply charging a person/place/thing or idea with energy; your intentions and the forces you invite are what creates magic. Blessing is inviting energy of the highest good to manifest in a person/place/creature/thing or at an event. Consecrating means you are dedicating a person/place/thing for a specific function. It’s good to know some general information about each element, so I’ll give a brief description of associations.

Earth energy is connected to green or brown, nurturing, growing, grounding, stability, fertility, prosperity, darkness, quiet, winter, all kinds of soil, sand, rocks, roots, plants, crops, mushrooms, moss, salt, nuts, and grains. You might want to use grain, meal or rice in a bowl, or sand, soil, or nuts in a bigger container, you could use a hunk of moss or even material coloured brown or green. It would be good to keep in mind that whatever symbol you choose is normally sprinkled, wiped or wrapped around the item being blessed.

Fire energy is connected to red, purifying, cleansing, heat, smouldering, speed, courage, energy, strength, influence, sex, protection, light, storms, summer, stinging nettles, thorny plants, volcanoes, deserts, candles, fireplaces, spicy foods. The most common way to bless with fire is to pass the object through the flame; a candle works nicely and is the easiest method.

Water energy is connected to blue, purifying, soothing, healing, love, emotions, psychic awareness, dreams, peace, relationships, flow, all bodies of water, water lilies, seaweed, roses, gardenia, most flowers, wells, shells, darkness, washing, and bathing. Again, water is either poured or sprinkled over the object being blessed so you could use a cup of water, or sprinkle water from a shell or sprinkle rosebuds over your tools.

Air is connected with yellow, movement, flying, floating, freshness, fragrance, breath, wind, incense, and smoke, fragrant flowers, flying creatures, windy places, divination, learning, knowledge, freedom, travel and hearing. The easiest way to represent air is with incense and again the tool is passed through the smoke to bless it.

Decide what materials you wish to represent each element, the simple list: incense, incense burner, candle and candleholder, matches or lighter, shell or cup with water inside, bowl holding your earth element, you also need a spirit candle, snuffer, altar cloth and space where you can work comfortably without being disturbed. Set up the altar, the spirit candle is in the center, the elements arranged in your tradition (many Wiccan’s follow the east-air, south-fire, west-water, north-earth arrangement) this is your ritual so do what works for you!

Do whatever it is that gets you ready to be in sacred space, have everything you need in easy reach, light the spirit candle and ground into the earth letting any worries go. Visualize the earth energy reaching towards you, flowing up your body, just like water through the roots, trunk, branches and leaves of a tree, imagine the energy overflowing from just above your head and returning to the earth. When you are ready, cast a circle or make sacred space in your usual way.

The first step is to declare the symbols of the elements as being sacred, you can say something like

“I bless and consecrate these symbols to represent the four powers of the elements and to lend their energies to this rite, (light the incense, the fire candle, dip fingers in water, touch the earth representation) I bless and honour the spirit that is in all things, (palm above spirit candle) in the names of the Lady and Lord so mote it be! “

Take the first tool and pass it through the incense smoke say something like “I bless you with the powers of air, may you help me to have clear thought, freedom, knowledge, to study and learn, to communicate openly and listen wisely in all I do. Blessed Be!”

Pass the tool through the fire flame, “I bless you with the powers of fire, may you help me to take action when required, to know my strength and will, to be courageous, daring and empowered. Blessed Be!”

Bathe the tool in the water, “I bless you with the powers of water, may you help me to dare and be receptive, to know and face my emotions, to discover the mysteries and to flow through life. Blessed Be!

Sprinkle the tool with the earth substance, saying “I bless you with the powers of earth, may I know when to be silent, bring stability, abundance, wisdom, grounding, strength and help me remember my connection to the earth, her people and my ancestors. Blessed be!”

Now pass the tool over the spirit candle and say” I bless you with spirit that is in all things, may you be a creature of magic, change, and transformation. Blessed Be!”

Then cradle the tool in your hands, thinking of the energies placed within it. Be aware of any messages, thoughts or feelings associated with your magical helper, you may even be given a name for it.  Take a deep breath filling your lungs, then blow your over the tool and say “I breathe my life into you to be with you. You are a symbol of my spirits desire to help focus my will, thoughts and ideas; we are in service to the Goddess and God for the best and highest good of all concerned. (I name you ___ [optional])So Mote it Be!”

Before you finish remember to thank the energies you invited, and to bid them hail and farewell, and if you cast a circle to open it. Remember to snuff the candles, it’s a respect thing and actually use the tools you have blessed, you are bonded together, they don’t like to be neglected! There are other ways to charge up magical tools using the sun, moon phase, crystals, smudge etc. I’ll tackle that next time.

Abundant Blessings

A Mini Altar For the Hospital

May 9, 2011 in Altars

Things with this pregnancy aren’t going so well, and it seems that I’ll be on bedrest in the hospital for some time – we’re hoping for a few more weeks of growth for the baby at the least, but we’re in good hands, with careful monitoring, in a hospital with an excellent NICU – we know from experience, because our son spent many weeks here when he was born 13 weeks early, 3 years ago next month.

One thing we’re doing different this time is being a little more open about our faith. We are far more comfortable with the environment than we were last time, and we’re far more comfortable with making the space our own.

We’re starting with an altar-in-progres here in my room, which will eventually move to the shelf that we know baby will have near his or her bed in the NICU. We’re just getting started – but so far, I think we’re doing well:

hospital altar

My eventual plan is to borrow one of my son’s small (handkerchief sized) playsilks for an altar cloth, and to include family photos and an LED tealight candle, and then to see what else is needed.

I’ve got one more guest altar post in the works, which I’m hoping to have ready for my next posting, but it’s likely I’ll go on hiatus for a bit after that, given everything else going on, as we’re likely to be a bit busy here for the next few weeks.

*****

As always, we’re interested in featuring your altar in upcoming posts — send photos and descriptions to submissions@thepaganhousehold.com

Blessings,

Janet

Family and Ancestor Altar

April 18, 2011 in Family Crafting

We have talked about many things in this column up to this point. About building traditions, about worshiping and praying together. But family needs a place to gather together. I know that many of you are thinking that is what the Home is for, and you would be right. But inside the Home a Strong and Spiritual family needs a gathering place for their spiritual purposes. And as you saw last Monday, with Janet’s altar post, one of the things that you can use for this purpose is the Family Altar. A small table that acts as the central location of spirituality in your house. The only thing to remember about the Family Altar is that there are no rules for how one of these should be built or look. They should each be as unique as the family is. But here are some suggestions to start with:

  • The family Deities should be represented. If you haven’t found who those are then you can just have representations of the Goddess and God on there instead. Look at the end of this chapter on a meditation and tips to help you with this.
  • There can also be a representation of the One. The principle that the Goddess and God are the two parts of. If this is not part of your mythos, then of course you can exclude this.
  • A spot for the Ancestors and Elders should be reserved as well. You can mark this with a candle or a small lamp and an offering plate. You can also include pictures of some of those that have passed on. Or you can spin this out into an altar only for the Ancestors, see below.
  • The family should have something to represent it. In our house we use an oil lamp and light it on Sabbats and in times of sickness, stress and happiness. This is from our family coven being part of FWTI. Now I know that these are an odd combination of events but these are the exact times that we need to be reminded of our connectedness. And in all three cases one can forget that others can share in the burden or want to share in the joy. Now if the idea of an oil lamp makes you cringe, you could also use a symbol that everyone can touch as they pass by to remind them of the fact that they are connected to the rest of the family.
  • You may also want to have representations of the four elements as well. Whether you use colored candles or actual physical symbols of them.
  • Another suggestion is the Family Book of Shadows. Which should be a compilation of rituals and traditions of the family. Look at the second half of this book on crafting a Family Book of Shadows.
  • You can also put photos of each member of the family and photos of different rituals and trips that the family has taken.
  • You can also decorate the altar with symbols of each of the seasons and/or Sabbats.

Placement and Tips

Now as you go ahead with the building of your family altar. Just keep a few things in mind;

  • Put it where the most traffic is. It does no good if the family is not reminded of it.
  • Use it. Build your rituals around it. Pray at it. The more that you do these things, the more “spiritually charged” the Family Altar will become.
  • I have always found that simpler is better. The more on it, the easier it is to knock something over and the less “working” room there is.
  • Do not worry about getting it “wrong”. If it “feels” right then it is “right”.

Ancestor Altar

Now that you have created an altar to honor the family and for that family to share, you may also want to create a place to honor the Ancestors. My wife did this for our family, she created what we are calling the Ancestor wall. This basically is a place to pay respect and leave offerings for those that have passed on.

Starting your own Ancestor wall is a worthwhile and easy project for you to do. I recommend starting with a family tree and trying to compile photos along the way. But there are other things you can do as well to make your Ancestor altar as unique as your family.

  • Go to the living. Talk to your existing family and gather as much information as you can on as much family as they can remember. See it was important to talk to your parents and the rest of your extended family.
  • Remember that stories are important, you may even want to compile those stories. Either in written form or in video or audio form.
  • Then move on to the physical records. Starting with family bibles, diaries, letters, photograph albums.
  • And finally up to non-federal records. By this I mean, local sources like courthouses. For birth and death certificates. Along with marriage documents or deeds.

Where do I go from here?

Now that you have started on this project and have something that you can put up, what do you do next? There are many ways to go. Like we plan to do in the Spring, you could hang up a special shelf for your Ancestors and put up pictures and the family tree. Then regularly clean that area and leave offerings and light candles to honor them. Or you could put that material on your normal family altar and always be reminded of them. The list goes on and on about the way you could honor your Ancestors in this way. Each way is unique to the family being honored.

Yet the more you work on bringing them into your home and into your rituals the more helpful your Ancestors can be. From lending energy for magick to giving you warnings in your dreams of things to come.

And by all means share some of your altars so we can showcase them on our biweekly altar column. Send an email with pictures and descriptions to submissions@thepaganhousehold.com

Family and Ancestor Altars

April 11, 2011 in Altars

Patrick is going to post next week on creating family and ancestor altars, so I asked if he’d let us see his ahead of time. Here’s what he shared:

First is his family altar. It features the Goddess and the GreenMan, with the Family Light from FWTI in the center. There’s also a corn dolly made at Imbolc. The snake skin for the change that the family hopes to bring.

family altar - goddess and greenman, family light, corn dolly from imbolc, snakeskin for change

The second one is the start of their ancestor altar.  He says that right now, it’s only got his wife’s side of the family, because they’re still researching his family.

ancestor altar - photos and family tree

 

So, tune in next Monday to read some ideas on how you might start your own family and ancestor altars!

*****

As always, we’re interested in featuring your altar in upcoming posts — send photos and descriptions to submissions@thepaganhousehold.com

Blessings,

Janet

Supermoon Ostara Altar

March 28, 2011 in Altars

Around here, Ostara usually comes with snow. If not, we have little beetles that look like lady bugs – between that and St Patrick’s right about the same time, this is the altar cloth I almost always use in March.

Supermoon Altar

There’s a nice dark blue bowl (a Japanese rice bowl, actually) for scrying there in the back. In the middle is “The Moon” from the Daughters of the Moon tarot deck – one of my favorites from this deck. It’s hard to see in the front, but there are a couple of pieces of moonstone, one carved into a crescent moon shape. There’s also a sphere of bloodstone that has always reminded me of the moon, a piece of kyanite, a blue sea shell, and my typical smudge bundle.

Supermoon Altar 2

*****

As always, we’re interested in featuring your altar in upcoming posts — send photos and descriptions to submissions@thepaganhousehold.com

Blessings,

Janet

Winter Altar

February 14, 2011 in Altars

I figured I’d show off a little bit of how I organize my altar supplies this week.

Here’s my current altar, due to be changed out in a few days  on the full moon – the snowflakes are fitting – we’ve still got nearly a foot of snow on the ground, even after two days above freezing:

January full moon altar

We’re using this nice microwave cart for an altar these days, because of the built in storage. First, we have this nice drawer for little things and spell needs:

storage for herbs, small crystals, bags, and other spell supplies

Usually there are a couple of lighters in there, along with many commonly used supplies – for a quick ritual or spell, just pull open the drawer and pull what you need. I’ll be the first to admit it’s gotten a bit messy in the last couple of years; I’d like to improve on that and put in little baskets to keep things separate, but like everything here, it’s one project at a time.

The other nice thing about this cabinet is the lower storage area:

storage for altar cloths, crystals, candles, and more

Again, more organization would be good, but the lower right has the altar cloths, in order they should be used (next one is on top). There on the lower left, towards the back, is the travel altar that often serves as an organizing space for any ritual that’s not done here on this altar – my big shell full of stones and crystals, along with mini candles live there full time. You can see other goddess images, candles, and bowls and chalices there too.

*****

As always, we’re interested in featuring your altar in upcoming posts – send photos and descriptions to submissions@thepaganhousehold.com

Blessings,

Janet

Homemade Wood Stove/Censer

January 21, 2011 in Minimalism

For my first post, I thought that I’d get you trying to make something!

(There are pictures for many of the steps, and these are in a gallery at the end of the post)

You will need:

Two food cans,  doesn’t matter what sizes, as long as one will fit inside the other comfortably, and you’ve eaten the contents!

A pair of long-nosed pliers

A pair of tin snips

An old style can opener

A flat wood drill bit, awl, or nail

Hobby Tool like a Dremel (OPTIONAL)

Absolute care and personal safety (ESSENTIAL) – some sharp edges while making!

To Make:

Take the smaller of the two cans and turn it upside down. With the flat bit, make a hole in the center of the can bottom, holding the can by the outside to preserve the can shape. This is where the flat bit is the most preferable method, as hammering in a nail will crush your can.

Using the circles of the can bottom patterning, and your center hole as a guide, make a hole at north, south, east, and west at the first circle. Then still using the  circle, make a hole between the other holes. You should now have eight smallish holes in a circle, with a ninth in the center.

Continue to make holes in a straight line, at each circle pattern, until you get near to the can edge. You can experiment with the amount of holes, they are to create airflow to the base of the stuff you are to burn. You can make a series of holes all around the bottom of the can, about a 1/4 inch from the bottom, to increase the airflow (although in this one I didn’t due to small size of the can, and to make the picture steps clearer).

Now turn your can the right way up (open end up). Make a series of holes about a 3/8 inch from the can rim, you can experiment with the size and amount of these holes, as they are going to become inward-facing gas flames! I have made stoves with lots of small holes close together and stoves with larger holes every 1/2 inch or so, both work equally well!

Now for the really sharp bit!

The larger can needs to be turned upside down. Place your small can on the large can and either mark around it or notice which circle on the bottom is a match (Red Circle). You need to then cut the next smaller circle, (usually about 3/8 inch) out (Black Circle). Use either the old style can opener, or a series of closely made holes with the flat bit (or a mixture of both), to cut out this center circle.

Using your tin snips, carefully cut from the open center to the marked line or circle. Try not to go too far over the line, its best to make many such cuts, so you have lots of small tabs, these will be used to keep your small can in place.

Carefully bend the tabs inward with your long-nosed pliers along the circle, when all have been bent back, take your small can and ease it into place. I usually put the small can (open end down) on the floor or a hard surface, and push down with a pair of  gloves or a towel on the larger can, until it slips into place. You may have to keep bending back the tabs but do persevere, as the tighter fit the better.

Now you have to make a final set of holes, the bigger the better (or the now magic 3/8 inch!), around the base of your stove and about every inch or so. Make sure that your internal gas holes are clear of the holding tabs by pushing your flat bit into them (I usually use the flat bit or long screwdriver to make sure that the tabs are holding the inner can tightly by turning the stove upside down and poking  them into place, and any long ones are bent back on themselves).

These stoves are very efficient. You can use them for camping, trekking, survival situations, but best of all for all outdoor Pagans, you have a self contained burner for your Altar (providing it is on a heatproof surface).  In the right conditions you can boil water in about seven minutes. Just fill the stove with wood, and the gas produced from the burning wood, ignites from the air coming in from the gas holes, producing secondary flames!

Raw incense can be thrown in, reducing the need for charcoal tablets.

Blessings and Enjoy!

Mel

Just What is an Altar, Anyway?

January 17, 2011 in Altars

Every other Monday, I’ll (hopefully) be showing off someone’s altar, and talking about how to incorporate altars into your home.

When we moved to this house in 2001, I was thrilled – for the first time ever, I’d have a place to put a permanent altar, rather than packing all my tools in a plastic tub, and taking  them out and using the top of the tub as an altar as needed. Little did I know how difficult it was going to be to actually get to that permanent altar space.

First, what is an altar?

While it can take many forms, in its simplest form, an altar is a surface used for ritual – for offerings, for working spells, for honoring specific deities or spirits.

Over the years, I’ve used my altars as a place for focus during meditation, and a place for expressing my faith, a place for working spells and a place for honoring ancestors. While altars don’t have to have a lot of work or expense put into them, I find that a little bit of thought makes an altar a centerpiece of my spiritual life – an anchor of sorts, no matter how chaotic the rest of the world is.

Every full moon for the last couple of years, I’ve re-done my altar. For the full moon right before Yule, this is how it ended up:

Yule 2010 Altar

Janet's Yule Altar, 2010

What doesn’t show well in the photo is the center of the altar – a snowflake pattern of crystals surrounding a mother Goddess figurine.

center of altar

Crystal layout on altar

I didn’t start out doing things like this – over the next few weeks, I’ll discuss how I worked my way up to this, and the sorts of things I keep around for altar use.

As a reminder, I want to see your altars! Send me a photo and let’s chat about getting your altar in one of my articles. Any kind of altar, for any use or any ritual, is fine.